1-80
of
535
results
-
Machine Screws Round Head Phil...Machine screws have a uniform diameter along their entire length and are desig... Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more
-
Prime-Line 9001726 Machine Scr...Prime-Line 9001726 Machine Screws Flat Head Phillips Drive 1/4 In.-28 X 1-1/2 ... Prime-Line 9001726 Machine Screws Flat Head Phillips Drive 1/4 In.-28 X 1-1/2 in (10 Pack) Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw... more
-
Prime-Line 9054964 Hex Lag Scr...Lag screw bolts are used in place of standard wood screws whenever the mountin... Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more
-
Prime-Line 9001726 Machine Scr...Machine screws have a uniform diameter along their entire length and are desig... Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more
-
1PACK Prime-Line Offset Adjust...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 7/8 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
Prime-Line 9178486 Socket Head...Prime-Line 9178486 Socket Head Cap Screws Hex (Allen) Drive 1/4 in-20 X 1/2 in... Prime-Line 9178486 Socket Head Cap Screws Hex (Allen) Drive 1/4 in-20 X 1/2 in Black (10 Pack) Socket head cap screws have cup points that produce a thin edge that digs into hard surfaces for a secure hold. Rounded head has splined outer circumference... more
-
1 PK Prime-Line 1-1/2 In. Slid...Combination of a steel concave or grooved ball bearing roller that is 5/16 inc... Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more
-
Prime-Line 9055515 Hex Lag Scr...Lag screw bolts are used in place of standard wood screws whenever the mountin... Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more
-
Prime-Line 9038073 Drywall Scr...Prime-Line 9038073 Drywall Screws Bugle Head Phillips Drive #7 X 1-1/2 In. Bla... Prime-Line 9038073 Drywall Screws Bugle Head Phillips Drive #7 X 1-1/2 In. Black (75 Pack) Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Headquartered in Redlands California Prime-Line has been recognized as North... more
-
Prime-Line 9173372 Socket Cap ...Socket head cap screws have cup points that produce a thin edge that digs into... Socket head cap screws have cup points that produce a thin edge that digs into hard surfaces for a secure hold. Rounded head has splined outer circumference with internal hex drive. Use an Allen wrench (hex key) to secure with required torque as... more
-
Prime-Line 9003303 Machine Scr...Prime-Line 9003303 Machine Screw Round Head Slotted/Phillips Combo #6-32 X 1-1... Prime-Line 9003303 Machine Screw Round Head Slotted/Phillips Combo #6-32 X 1-1/2 in Grade 18-8 Stainless Steel Pack of 100 Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in... more
-
1PACK Prime-Line 1/2 In. Offse...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 7/8 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
1PACK Prime-Line Offset Adjust...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 7/8 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
1 PK Prime-Line 1-1/4 In. Nylo...Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing rol... Combination of a 1-1/4 inch diameter nylon concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into... more
-
Prime-Line 9016850 Sheet Metal...Prime-Line 9016850 Sheet Metal Screw Self-Tapping Flat Head Phillips #8 X 2-1/... Prime-Line 9016850 Sheet Metal Screw Self-Tapping Flat Head Phillips #8 X 2-1/2 in Zinc Plated Steel Pack of 50 The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially... more
-
1PACK Prime-Line 1/4 In. Offse...Single wheel top hung side mounting offset adjustable steel bracket round edge... Single wheel top hung side mounting offset adjustable steel bracket round edge nylon wheel back 1-3/8\ offset fits 3/4\ to 1-3/8\ thick doors fits on Cox. 2 roller assemblies (6) No. 8 x 3/4\ Phillips pan head sheet metal screws. more
-
Prime-Line 9155493 Sheet Metal...The threads on sheet metal screws are designed to pull two materials tightly t... The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more
-
Bed Frame Rail Clamp Kit Fits ...This bed frame clamp kit includes 2 sets of clamps that are used to lock the m... This bed frame clamp kit includes 2 sets of clamps that are used to lock the meeting rails of adjustable-width bed frames. All components are constructed of heavy gauge steel and come in a zinc-plated finish. Not sure of the bed frame s rail... more
-
1PACK Prime-Line 1/4 In. Offse...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 7/8 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
Socket Set Screws Metric M6-1....Socket set cap screws have cup points that produce a thin edge that digs into ... Socket set cap screws have cup points that produce a thin edge that digs into hard surfaces for a secure hold. This fastener is headless and contains an internal hex drive. Use an Allen wrench (hex key) to secure with required torque as needed.... more
-
Prime-Line 9154661 Sheet Metal...Prime-Line 9154661 Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 ... Prime-Line 9154661 Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 X 1/2 (25 Pack) The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a... more
-
Prime-Line 9000349 Machine Scr...Prime-Line 9000349 Machine Screws Flat Head Phillips Drive #4-40 X 1/2 In. Gra... Prime-Line 9000349 Machine Screws Flat Head Phillips Drive #4-40 X 1/2 In. Grade 18-8 (25 Pack) Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine... more
-
Wood Screws Flat Head Phillips...Wood screws are used to attach two pieces of wood together and they feature a ... Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more
-
Prime-Line 9047896 Dowel Screw...Prime-Line 9047896 Dowel Screws 5/16 In. X 3-1/2 In. Plain Steel (10 Pack) Woo... Prime-Line 9047896 Dowel Screws 5/16 In. X 3-1/2 In. Plain Steel (10 Pack) Wood-to-wood dowel screws have wood screw threading on both ends and are used to connect two pieces of wood. A smooth section in the middle allows for use of a wrench or pliers... more
-
Prime-Line 9003476 Machine Scr...Machine screws have a uniform diameter along their entire length and are desig... Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more
-
Prime-Line 9051715 Binding Pos...Binding/binder posts also called barrel nuts are internally threaded and accep... Binding/binder posts also called barrel nuts are internally threaded and accept a machine screw of the same diameter and thread size. Since the head of a binding post sits nearly flush against the surface they can be used in applications where there... more
-
Machine Screws Flat Head Phill...Machine screws have a uniform diameter along their entire length and are desig... Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more
-
Prime-Line PL 7909 1/16 inch S...Prime-Line PL 7909 1/16 inch Screen Clips with Screws White-Plastic (single pa... Prime-Line PL 7909 1/16 inch Screen Clips with Screws White-Plastic (single pack)2) more
-
1PACK Prime-Line 1-1/8 In. x 1...Adjustable guides used for aligning pocket doors. Will accommodate any thickne... Adjustable guides used for aligning pocket doors. Will accommodate any thickness of door. Slotted mounting holes for horizontal adjustment. Non-handed. Includes installation screws. more
-
1PACK Prime-Line 1-1/4 In. Sli...Combination of a steel concave or grooved ball bearing roller that is 5/16 inc... Combination of a steel concave or grooved ball bearing roller that is 5/16 inches thick with a 1/4 inch axle hole and a combination of 5 different axle choices. Depending on the situation you can choose to rivet the roller into place or use a roll pin... more
-
Prime-Line D 1798 1-1/4 In. Ny...Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack... Prime-Line D 1798 1-1/4 In. Nylon Ball Bearing Sliding Door Roller Set (2 Pack) more
-
1PACK Prime-Line 1/2 In. W. x ...These are extruded aluminum clips used to attach storm windows or screen panel... These are extruded aluminum clips used to attach storm windows or screen panels to storm door frame with aluminum knurled head thumbscrews. more
-
Prime-Line D 1798 Sliding Door...Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (... Prime-Line D 1798 Sliding Door Roller Set with 1-1/4 inch Nylon Ball Bearing (2-pack) Gold more
-
Prime-Line 9016681 Sheet Metal...The threads on sheet metal screws are designed to pull two materials tightly t... The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more
-
Prime-Line 9034767 Wood Screw ...Prime-Line 9034767 Wood Screw Flat Head Phillips #6 X 1-1/4 in Solid Brass Pac... Prime-Line 9034767 Wood Screw Flat Head Phillips #6 X 1-1/4 in Solid Brass Pack of 25 Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid... more
-
Prime-Line 9035187 Wood Screw ...Prime-Line 9035187 Wood Screw Flat Head Phillips #8 X 1-1/4 in Solid Brass Pac... Prime-Line 9035187 Wood Screw Flat Head Phillips #8 X 1-1/4 in Solid Brass Pack of 100 Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid... more
-
1PACK Prime-Line 1/2 In. Offse...Single wheel top hung side mounting offset adjustable bracket round edge nylon... Single wheel top hung side mounting offset adjustable bracket round edge nylon ball bearing wheel. Fits 3/4\ to 1-3/8\ thick doors. Contains 2 roller assemblies and 6 No. 4 x 3/4\ Phillips wood screws. more
-
Prime-Line N 6501 Closet Door ...2 Pack Back wardrobe door roller is constructed from nylon and comes affixed t... 2 Pack Back wardrobe door roller is constructed from nylon and comes affixed to a steel bracket. It features an offset adjustable top hung side mount design. This style roller is used on Acme and similar styled bypass doors that are 3/4 in. to 1-3/8... more
-
Prime-Line Products 2-1/4 in. ...This is a set of one inside and one outside chrome shower door handles. Very p... This is a set of one inside and one outside chrome shower door handles. Very popular in the North East these chrome handles have 2-1/4 in. mounting holes and can be found on sliding tub enclosures as well as swinging shower doors. The inside handle has... more
-
1PACK Prime-Line Offset Adjust...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 3/4 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
Lag Shields Long 1/4 in. X 1-1...Lag shield anchors allow lag screws to be installed into concrete and masonry ... Lag shield anchors allow lag screws to be installed into concrete and masonry walls. After drilling a hole into the material lag shields should be tapped into place ribbed side first until flush with the surface. The lag screw can then be installed... more
-
1 PK Prime-Line 1-1/2 In. x 36...Flat style shower door sweep that is 1-7/16 inches wide and can be cut to size... Flat style shower door sweep that is 1-7/16 inches wide and can be cut to size. It is held onto the swinging shower door by a metal drip rail that is located on the bottom of the door. Easy Installation - Just remove the screws from the drip rail... more
-
1PACK Prime-Line 1/8 In. Offse...Single wheel top hung stamped steel bracket with nylon adjusting wheel for 3/4... Single wheel top hung stamped steel bracket with nylon adjusting wheel for 3/4\ to 1-3/8\ thick doors. 7/8\ diameter nylon wheel. Fits on Stanley doors. 2 per card with screws. more
-
1PACK Prime-Line 1/4 In. Offse...Single wheel top hung side mounting offset adjustable bracket round edge nylon... Single wheel top hung side mounting offset adjustable bracket round edge nylon ball bearing wheel. Fits 3/4\ to 1-3/8\ thick doors. Contains 2 roller assemblies and 6 No. 4 x 3/4\ Phillips wood screws. more
-
Prime-Line D 1502 1/4 In. Insi...Prime-Line D 1502 1/4 In. Inside Diameter x 1-1/4 In. Outside Diameter Steel U... Prime-Line D 1502 1/4 In. Inside Diameter x 1-1/4 In. Outside Diameter Steel Unfinished Roller (2 Pack) Product Description These rollers are constructed of steel components and include a set of installation nuts and bolts for each. Each wheel has a... more
-
Prime-Line N 6525 Wardrobe Doo...2 Pack side mount top hung adjustable roller bracket with a 3/4 in. convex nyl... 2 Pack side mount top hung adjustable roller bracket with a 3/4 in. convex nylon roller and 1/2 in. offset that fits onto the back wardrobe door panel. It fits 3/4 in. to 1-3/8 in. thick doors. For front panel or 1/4 in. offset. Fits Harvey closet doors. more
-
Prime-Line 9019852 Sheet Metal...The threads on sheet metal screws are designed to pull two materials tightly t... The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more
-
Prime-Line 9074498 Machine Scr...Hex nuts are the most widely used nuts and will work for most applications. Th... Hex nuts are the most widely used nuts and will work for most applications. They are standard thickness and can be installed with a wrench or socket set. Machine screw nuts is a subset of finished hex nuts designed for use with machine screws which are... more
-
Prime-Line Products PL 7909 1/...1/16 white plastic screen clips used to secure window screens storm windows an... 1/16 white plastic screen clips used to secure window screens storm windows and storm door panels to a door or other stationary surface. The 1/16 offset is usually used in conjunction with white screen frame requiring a 1/16 offset to mount. 1/16 white... more
-
1PACK Prime-Line Offset Adjust...Single wheel top hung side mounting offset adjustable steel bracket for bypass... Single wheel top hung side mounting offset adjustable steel bracket for bypass doors. 3/4 In. convex nylon wheel. Hardware is included. 1 pair per card. more
-
Prime-Line 9074496 Machine Scr...Prime-Line 9074496 Machine Screw Hex Nuts 1/4 In.-20 Solid Brass (25 Pack) Hex... Prime-Line 9074496 Machine Screw Hex Nuts 1/4 In.-20 Solid Brass (25 Pack) Hex nuts are the most widely used nuts and will work for most applications. They are standard thickness and can be installed with a wrench or socket set. Machine screw nuts is a... more
-
Prime-Line 9030553 Sheet Metal...The threads on sheet metal screws are designed to pull two materials tightly t... The threads on sheet metal screws are designed to pull two materials tightly together. The self drilling tip eliminates the need to drill a pilot hole. more
-
1/4 in. Screen Clips with Scre...This is a nylon sliding screen door tension spring roller. It features a 2- 1/... This is a nylon sliding screen door tension spring roller. It features a 2- 1/4 in. flat heat-treated high tension spring steel. Fits Metal Industries and Academy. more
-
1-1/2 in. Steel Ball Bearing S...This is an F-tab patio door roller assembly with a 1-1/2 in. concave steel bal... This is an F-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... more
-
Single 1-1/2 in. Nylon Ball Be...This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved... This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more
-
Prime-Line N 6576 Mirror Door ...Bottom mount roller assembly for mirrored wardrobe doors. Used by Marshall Doo... Bottom mount roller assembly for mirrored wardrobe doors. Used by Marshall Doors the door rests on a tab on the bottom edge of the roller housing while being held in place by installation screws from the side and into installation holes on the roller s... more
-
2Pc Prime-Line 1 in. D X 1/4 i...This Andersen roller assembly is an insert style with mounting tabs and includ... This Andersen roller assembly is an insert style with mounting tabs and include installation screws. The high density polyethylene housing has an aluminum inner housing with a 1 in. high density polyethylene roller. This roller assembly is used on the... more
-
1-1/2 in. Steel Ball Bearing T...This is a E-tab tandem roller assembly with two 1-1/2 in. concave steel ball b... This is a E-tab tandem roller assembly with two 1-1/2 in. concave steel ball bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door s bottom rail. The housing is 11/16 in. wide with a... more
-
3 PK Prime-Line 1-1/2 In. x 36...Flat style shower door sweep that is 1-7/16 inches wide and can be cut to size... Flat style shower door sweep that is 1-7/16 inches wide and can be cut to size. It is held onto the swinging shower door by a metal drip rail that is located on the bottom of the door. Easy Installation - Just remove the screws from the drip rail... more
-
1-1/2 in. Sliding Glass Door R...This is a K-tab patio door roller assembly with a 1-1/2 in. concave steel ball... This is a K-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more
-
1 Pc Prime-Line Steel Double W...Finish: *Gauge: *Hardware Included: *Length: 1.69 *Material: Steel *Number in ... Finish: *Gauge: *Hardware Included: *Length: 1.69 *Material: Steel *Number in Package: 6 *Packaging Type: Carded *Product Type: Double Wing Clip *Brand Name: Prime-Line *Screws Included: Yes *Sub Brand: *Width: 0.75 *Diameter: *Color: *Frame Size:... more
-
2PACK Prime-Line Polyethylene ...White polyethylene guide and white polyethylene side saddles; restores smooth ... White polyethylene guide and white polyethylene side saddles; restores smooth operation of track mounted drawers. Fits a 1/4\ x 1-1/16\ track. Contents: 1 guide 2 side saddles and 1 set of installation fasteners. more
-
3Pc Prime-Line 1 in. D X 1/4 i...Repair your sliding door rollers with the Prime-Line products 3/4 inch back-po... Repair your sliding door rollers with the Prime-Line products 3/4 inch back-position top-hung bypass closet door rollers with brackets. These rollers fit doors 3/4 - 1-3/8 inch thick are housed in 3/4 inch offset adjustable brackets and are compatible... more
-
Prime-Line G 3077 Nylon Roller...1/2 in. Nylon Roller Sliding Window Roller Assembly IWC (2-pack). This roller ... 1/2 in. Nylon Roller Sliding Window Roller Assembly IWC (2-pack). This roller comes affixed to a stamped aluminum housing. The roller housing slips up and into the slider side stile and is held in with a set screw. Fits on International windows series... more
-
1 Pc Prime-Line Silver Steel H...Finish: Zinc-Plated *Gauge: 1 inch *Hardware Included: Yes *Length: 1 *Materia... Finish: Zinc-Plated *Gauge: 1 inch *Hardware Included: Yes *Length: 1 *Material: Steel *Mount Type: Screw Mount *Number in Package: 2 *Bracket Type: Handrail *Packaging Type: Pegged *Brand Name: Prime-Line *Product Type: Bed Frame Clamp *Screws... more
-
Switch Plate Cover Screw #6-32...This is a switch and wall plug cover screw. It is a #6-32 by 1/2 in. machine t... This is a switch and wall plug cover screw. It is a #6-32 by 1/2 in. machine threaded screw. Used to attach most standard electrical cover plates. White painted. more
-
2PK Prime-Line 7/8 in. Dia. x ...These Prime-Line products sliding wardrobe back door roller assemblies feature... These Prime-Line products sliding wardrobe back door roller assemblies feature a nylon wheel attached to an adjustable steel bracket with a 3/8 inch offset. The assemblies are compatible with branded doors. more
-
1 PK Prime-Line Sliding Door H...This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside h... This deluxe patio door lock features a 9-3/4 in. hard wood pull. The outside handle is black diecast. The clamp latch has a clamp profile of 1/4 inch and a clamp projection of 1/2 inches in the locked position. The handle has 4-15/16 inch mounting... more
-
1PACK Prime-Line 1/2 In. W. x ...Panel clips for storm doors. 5/16\ H. x 1/2\ W. x 11/16\ L. with screws. Alumi... Panel clips for storm doors. 5/16\ H. x 1/2\ W. x 11/16\ L. with screws. Aluminum. more
-
2 PK Prime-Line 1/4 In. Brass ...Metal screw slot allows shelf to be fastened to peg; frequently used for heavi... Metal screw slot allows shelf to be fastened to peg; frequently used for heavily loaded shelves. 8 pegs per card. more
-
Prime-Line Diecast Screen Door...Are you having trouble sliding your screen door open or closed? Have you check... Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a very popular sliding... more
-
Prime-Line Mill Aluminum Storm...8 Pack 3/4 L x 1/2 W Mill Finish Self Locking Storm Door Panel Clips With Scre... 8 Pack 3/4 L x 1/2 W Mill Finish Self Locking Storm Door Panel Clips With Screws. more
-
Prime-Line 1 in. D X 0.25 in. ...This center grooved sliding screen door roller is constructed from nylon. It c... This center grooved sliding screen door roller is constructed from nylon. It comes affixed to a steel housing with an adjusting top screw. This style roller is used on Bay-Mills brand doors. more
-
Prime-Line Tek Screws,8 X 1/2"...These hex head Tek screws come zinc-plated in packs of 100. These #8 x 1/2 in.... These hex head Tek screws come zinc-plated in packs of 100. These #8 x 1/2 in. self-drilling fasteners are ideal for attaching sheets of sheet metal together, without the need to predrill pilot holes | Prime-Line Tek Screws,8 X 1/2", Zinc-Plated,... more
-
Prime-Line One-Way Shoulder Sc...These one-way shoulder screws are constructed of steel and come in a chrome-pl... These one-way shoulder screws are constructed of steel and come in a chrome-plated finish. They feature a tamper-proof head which prevents them from being loosened and removed once installed. These fasteners are manufactured with #10-24 threads and... more
-
1 Pc Prime-Line Slide-Co Brown...Finish: *Hardware Included: Yes *Height: 2.25 *Length: 2.25 *Material: Steel *... Finish: *Hardware Included: Yes *Height: 2.25 *Length: 2.25 *Material: Steel *Maximum Door Thickness: 1.38 *Mounting: Top *Number in Package: 2 *Packaging Type: Carded *Brand Name: Prime-Line *Product Type: Pivot and Guide *Screws Included: No *Sub... more
-
1 Pc Prime-Line Matte White Pl...Finish: Matte *Hardware Included: Yes *Height: 1.44 *Length: 1.44 *Material: P... Finish: Matte *Hardware Included: Yes *Height: 1.44 *Length: 1.44 *Material: Plastic *Maximum Door Thickness: 1.38 *Mounting: Floor *Number in Package: 2 *Packaging Type: Carded *Brand Name: Prime-Line *Product Type: Bi-fold Door Guide *Screws... more
-
1 Pc Prime-Line Matte White Ny...Finish: Matte *Hardware Included: Yes *Height: 1.25 *Length: 3 *Material: Nylo... Finish: Matte *Hardware Included: Yes *Height: 1.25 *Length: 3 *Material: Nylon *Maximum Door Thickness: 1.38 *Mounting: Bottom *Number in Package: 2 *Packaging Type: Carded *Brand Name: Prime-Line *Product Type: Door Guide *Screws Included: Yes *Sub... more
-
2Pc Prime-Line 1 in. D X 0.25 ...This is a tension spring roller assembly with an offset tension spring design ... This is a tension spring roller assembly with an offset tension spring design used by Academy and a variety of other patio door manufacturers. The roller is a 1 in. steel ball bearing roller attached to an offset heat treated tension spring. The 2-1/4... more
-
1 Pc Prime-Line Matte Tan Plas...Finish: Matte *Hardware Included: Yes *Height: 1 *Length: 2-1/8 *Material: Pla... Finish: Matte *Hardware Included: Yes *Height: 1 *Length: 2-1/8 *Material: Plastic *Maximum Door Thickness: 1.38 *Mounting: Floor *Number in Package: 2 *Packaging Type: Carded *Brand Name: Prime-Line *Product Type: Adjustable Floor Guide *Screws... more
Ads related to starrett s191 jack screw set 1 1 2